Insert the SIM card
Important: This device is designed to be used with a mini-UICC SIM card, also
known as a micro-SIM card only. A micro-SIM card is smaller than the standard SIM
card. Use of incompatible SIM cards may damage the card or the device, and may
corrupt data stored on the card.
Do not use SIM cards that have been modified to fit the micro-SIM holder. To replace
a standard SIM card with a micro-SIM card, contact your service provider.
Do not attach any stickers to your SIM.
1 Make sure the phone is switched off.
2 Place your fingernail in the gap on the bottom edge of the back cover, and
carefully lift and remove the cover.
3 If the battery is in the phone, lift it out.
4 Slide the SIM holder to unlock it. Use your fingernail to lift the SIM holder.
8
Get started
5 Make sure the contact area would face down, put the SIM into the holder, and
lower the holder.
6 Slide the SIM holder to lock it.
7 Line up the battery contacts, push the battery in, and replace the back cover.
Remove the SIM
1 Switch the phone off.
2 Remove the back cover.
3 If the battery is in the phone, lift it out.
4 Open the SIM holder, and pull the card out.